Katepal TopTite 3° Green is a DIY cap sheet suitable as a single-layer applications for roofs steeper than 1:20, and does not require an underlay membrane. Product is suitable also on an old single-layer applications. It is mechanically attached to the substrate from the nailing area on the top surface. The minimum installation temperature is +5°C. The reinforcement layer is polyester, and it is part of the Katepal Green product family, meaning it is manufactured using renewable raw materials.
Katepal products should be stored protected from direct sunlight and moisture. The products should be handled with care before installation. Roll products should be stored in an upright position. Rolls transported in a horizontal position should be stored upright after receiving the order. Pallets must not be stacked on top of each other. Pay attention to safe lifting: lifting instructions for the pallets can be found on each pallet (QR code on the plastic wrap of the pallet).