Cap sheet DIY
Katepal TopTite 3° SE
Katepal TopTite 3° SE is a DIY cap sheet with a coloured-granule finish and fine sand on the bottom surface. On the top surface of one edge and the bottom surface of the opposite edge there is a 120 mm wide adhesive strip covered by a protective plastic film.
Black
Instructions and Materials
Field of use
Katepal TopTite 3° SE is a DIY cap sheet suitable for single-layer application on roofs steeper than 1:20. It does not require an underlay membrane except in exceptional cases. The product can also be installed over existing single-layer roofing. It should be mechanically fixed to the substrate through the centre of the adhesive edge on the top surface. The minimum installation temperature is +5°C. The product has a polyester reinforcement layer.
Handling and storage
Katepal products should be stored away from direct sunlight and moisture and handled with care before installation. Roll products should be stored in an upright position – rolls transported horizontally should be turned upright after receiving the order. Pallets must not be stacked. Pay attention to safe lifting practices: pallet lifting instructions can be found via the QR code on the pallet’s plastic wrap.
Technical details
Surface Granule, Self Adhesive Edge
Bottom surface Sand, Self adhesive edge
Installation method Self-adhesive, Mechanical fastening
| Colour | Product number | EAN | Package weight | Size of sales unit (m²) | Pieces per pallet | Dimensions |
|---|---|---|---|---|---|---|
| Black | 30206 | 6417443302068 | 30 kg | 6.16 m² | 30 pcs | 1 x 7 m |
Ask about the product
If you need more information about the product, please send us a contact request, and we will get back to you. We will respond to your message as soon as possible, within a few business days.