Cap sheet DIY

Katepal TopTite 6°

Katepal TopTite 6° is a DIY cap sheet with a coloured-granule finish and fine sand on the bottom surface. On the top surface of one edge and the bottom surface of the opposite edge there is a 100 mm wide adhesive strip covered by a protective plastic film.
  • Red

  • Green

  • Brown

  • Grey

  • Black

Instructions and Materials

Field of use

Katepal TopTite 6° is a DIY cap sheet suitable for single-layer application on roofs steeper than 1:10. It has a polyester reinforcement layer and does not require an underlay membrane except in exceptional cases. The product can also be installed over existing single-layer roofing. It should be mechanically fixed to the substrate through the centre of the adhesive edge on the top surface. The minimum installation temperature is +5°C.

Handling and storage

Katepal products should be stored away from direct sunlight and moisture and handled with care before installation. Roll products should be stored in an upright position – rolls transported horizontally should be turned upright after receiving the order. Pallets must not be stacked. Pay attention to safe lifting practices: pallet lifting instructions can be found via the QR code on the pallet’s plastic wrap.

Technical details

Top surface Granule, Self Adhesive Edge
Bottom surface Sand, Self adhesive edge
Installation method Self-adhesive, Mechanical fastening

Installation instructions

ColourProduct numberEANPackage weightSize of sales unit (m²)Pieces per palletDimensions
Red26511641744326511030 kg7.2 m²24 pcs1 x 8 m
Green26512641744326512730 kg7.2 m²24 pcs1 x 8 m
Brown26513641744326513430 kg7.2 m²24 pcs1 x 8 m
Grey26514641744326514130 kg7.2 m²24 pcs1 x 8 m
Black26518641744326518933 kg7.2 m²24 pcs1 x 8 m

Ask about the product

If you need more information about the product, please send us a contact request, and we will get back to you. We will respond to your message as soon as possible, within a few business days.

Search the Website